Custom & Lightweight AC Resonant Test System for 10kV Cable Testing

Send Inquiry
Custom & Lightweight AC Resonant Test System for 10kV Cable Testing
Details
• Custom Design: Engineered for power maintenance and utility substation FAT testing.
• True Lightweight: Only 1/10 the weight of conventional sets, built for effortless field transport.
• Auto Resonance: Automatically scans frequency to lock resonant point; outputs pure sine wave.
• 10kV Asset Ready: Safely handles on-site AC withstand voltage testing for all 10kV power equipment.
Category
AC Resonant Test System
Share to
Description

Product Introduction

 

The  MOEORW-WXB46 (88kVA-44kV) is a lightweight, custom‑engineered variable frequency AC series resonant test system designed for efficient on‑site insulation withstand testing. Optimized for power cables, switchgear, and transformers, it utilizes the resonance principle to deliver high test voltages with minimum power demand, featuring intelligent tuning and full safety protection.

 

Product Parameter (specification)

 

Every unit is fully manufactured and calibrated ensuring strict compliance with IEC 358 international standards and DL/T 849.6 high-voltage resonant testing specifications.
 

System Model Configuration MOEORW-WXB46 (88kVA-44kV)
Rated Output Capacity 88 kVA
Rated Output Voltage 44 kV
Operational Input Power Three-phase 380V / Single-phase 220V, 50Hz/60Hz
Resonant Frequency Range 30 Hz ~ 300 Hz (Variable Frequency)
Output Voltage Waveform Pure Sine Wave, Total Harmonic Distortion (THD) < 1.0%
System Quality Factor (Q) Q ≥ 30 (Tested at f = 45 Hz)
Voltage Measurement Accuracy Operating Error ≤ 1.5%
Duty Cycle & Continuous Run 5 minutes continuous operation at rated capacity
Integrated Protection Control Overvoltage, Overcurrent, Zero-position safety start, and Flashover trip protection
Target Test Objects 10kV power cables, medium-voltage switchgear, main transformers, and HV motors

 

Product Features 

 

  • 90% Power Demand Reduction (1/Q Principle): The system requires input power capacity equal to only 1/Q of the total test capacity by covering solely active power losses.
  • Ultra-Compact & 1/10 System Weight: Eliminates bulky regulators and transformers, reducing total footprint and weight to only 1/10 of conventional sets.
  • Pure Sine Wave Output (Harmonic Elimination): Functions as a high-voltage filter network to remove waveform distortion and output pure sine waves.
  • Active Short-Circuit Burn-Out Prevention: System loop current drops to 1/Q upon breakdown, protecting the fault location from heavy-current damage.
  • Zero Recovery Overvoltage Risks: Resonance breaks immediately upon specimen breakdown, eliminating recovery overvoltage hazards.

 

Product Application

 

  • 10kV Power Cables: Designed for field handover and preventive AC withstand testing on high-capacity XLPE cables up to 10kV/500mm². 
  • 10kV Switchgear & Breakers: Tailored for factory and on-site insulation verification of 10kV circuit breakers, load switches, and disconnectors. 
  • 10kV Main Transformers: Optimized for reliable AC dielectric strength diagnostics on substation transformers of 10kV/20000kVA and below.
  • 10kV High-Voltage Motors: Perfect for verification testing after the installation, commissioning, or maintenance of 10kV industrial motors.
  • Power Engineering Field Utilities: Engineered as an ideal mobile test set for on-site power testing, utility installation, and substation repair units.

 

Application case image

 

1

 

On‑site AC withstand voltage test for switchgear cabinet

2
Complete‑set commissioning of large‑capacity series resonance system in factory test lab

Troubleshooting & On-Site Diagnostics

 

  • Cooling Fan Fails to Start: Verify emergency stop release and click "Fault Reset". For thermal protection, power down and ventilate for 30 minutes.
  • Failure to Locate Resonant Point: Ensure grounding resistance is ≤0.5 Ω and inspect the continuity of high-voltage reactors, transformers, and dividers.
  • Inability to Boost Voltage: Verify reactor inductance matches the capacitive load, or parallel the compensation capacitor for high dielectric loss.
  • High-Voltage Corona & Leakage Trips: Use dedicated corona-free lines with a maximum length of ≤ 5 meters for outputs >22kV.

 

FAQ

 

Q: Why is this series resonant system so much lighter than traditional test transformers?

A: Based on the series resonance principle, the input power source only needs to supply the active power losses of the system, which reduces the required supply capacity and weight to only 1/10 (1/Q) of conventional equipment.

Q: What major substation assets can the 88kVA 44kV configuration test?

A: This modular system features a multi-reactor design custom-engineered to test 10kV power cables (up to 1.2km), medium-voltage switchgear/breakers, 10kV main transformers, and HV industrial motors.

Q: How does the system protect heavy-duty test objects during an insulation breakdown?

A: Upon dielectric breakdown, the loop immediately detunes, causing the fault current to instantly drop to 1/Q of the normal test current. This completely eliminates large short-circuit surge currents and prevents burning damage to your test objects.

Q: Does it support different input power grid setups for remote on-site field testing?

A: Yes. The intelligent variable frequency power source supports both Three-phase 380V and Single-phase 220V at 50Hz/60Hz. Using a 220V source will allow the system to operate safely at up to 1/2 of its total rated capacitive load.

Q: What international test techniques and safety standards are followed by this system?

A: Every system is fully manufactured and calibrated ensuring strict compliance with IEC 358 international coupling capacitor/divider standards and DL/T 849.6 resonant test specifications, outputting a pure sine wave with total harmonic distortion (THD) < 1.0%<+DL/T 849.6-2004.

 

 

 

Hot Tags: Custom & Lightweight AC Resonant Test System for 10kV Cable Testing, China Custom & Lightweight AC Resonant Test System for 10kV Cable Testing manufacturers, factory, 108kVA 108kV Series Resonance Test Device, Series Resonant Test Set, high voltage test system, Hv Resonant Test System, 54kVA 54kV Series Resonance Test Device, Lightweight Variable Frequency Resonant Systems

Send Inquiry