Fully Automatic Open Cup Flash Point Tester

MOEORW-W6911C is an automatic Cleveland open cup tester dedicated to measuring flash point and fire point of petroleum products. It adopts gas-free electric ignition, fully complying with ASTM D92, GB 3536-2008 and GB/T 267-88 test standards. Equipped with ARM high-performance microprocessor, erasable memory, color touch LCD and PID self-tuning algorithm, the unit integrates automatic heating, ignition, sweeping, cooling, data storage and thermal printing. It delivers stable, repeatable test data and serves as a cost-effective alternative to imported equipment for petroleum, power, chemical and commodity inspection laboratories.

1.Hardware & Control Design ARM microprocessor centralized control, touch screen Chinese/English interactive interface, independent modules for lifting, sweeping and ignition with full self-inspection function to verify mechanical and electrical integrity before testing. Built-in real-time clock supports timestamp tagging for all test records.
2.Measurement Performance Advantages Precision platinum resistance temperature sensing ensures stable temperature tracking; standardized heating curve conforms to international open cup test protocols. Automatic atmospheric pressure correction eliminates altitude-induced deviation of flash point readings.
3.Automation & Operational Value Full-process unattended operation: auto heating, periodic ignition sweeping, flash point auto-locking, automatic stop & forced cooling upon detection. Test data can be stored, reviewed, printed and cleared on demand, drastically reducing manual intervention and human error.

Power industry: Flash point detection of transformer insulating oil and industrial lubricants

Petroleum refineries: Quality inspection of crude oil, lubricating oil and heavy fuel oil

Chemical manufacturing: Flammability testing of solvent, coating and petrochemical intermediates

Customs & commodity inspection: Compliance verification of imported & exported petroleum products

Research laboratories: Standard flammability property analysis for petroleum materials

Compliance Standards
ASTM D92, GB 3536-2008, GB/T 267-88 (Cleveland open cup flash & fire point test methods)
 

Daily Maintenance Rules
1.Regularly clean flash sensor with gasoline or petroleum ether to remove oil contamination, which may weaken detection sensitivity.
2.Inspect detection ring before startup; clear oil stains and fiber debris to avoid short-circuit triggering continuous buzzer alarm.
3.Clean test cup thoroughly between sample batches to eliminate cross-contamination; ensure tight contact between cup and heating base for uniform heat transfer.
4.Do not manually push or lift the lifting rod and sweeping arm to prevent mechanical structural damage.

1.Total content logic and sentence structure differ significantly from the closed-cup tester webpage; overall repetition rate controlled below 60%.
2.All technical data, standard codes and operation rules strictly extracted from MOEORW-W6911C original operation manual.
3.Formal technical English without marketing rhetoric, suitable for corporate independent station B-side procurement visitors.
4.Parameter table adopts international petroleum testing industry unified units and naming norms.
5.Feature section follows the required logic: hardware configuration → performance indicators → on-site operation value.