Lead-Acid Battery Cell Voltage Monitor

Send Inquiry
Lead-Acid Battery Cell Voltage Monitor
Details
Wireless simultaneous monitoring for up to 300 cells, single cell accuracy ±0.1%FS
Constant current & constant power dual modes, PID closed-loop current error ≤1%
Multi-unit parallel connection + RS485 remote control, built-in data storage & export
Category
Battery Tester
Share to
Description

Product Introduction

 

      MOEORW‑WUF51 integrates 5 core functions: discharging, charging, battery rejuvenation, online monitoring and rapid capacity evaluation. Built on ARM processor and 433 MHz wireless sampling system, it is designed for 88‑275 V DC lead‑acid battery banks widely used in 110 V / 220 V power systems.

      Discharge current: 0‑100 A; charge current: 0‑50 A; maximum 300‑channel cell voltage sampling. Adopt PWM‑PID closed‑loop control with current accuracy ±1%FS and cell voltage accuracy ±0.1%FS. Equipped with 7‑inch bilingual touch screen. It supports multi‑unit parallel expansion and RS485 remote control. With optional external current clamp, it realizes live‑load online test. Each unit undergoes 48‑hour full‑load ageing and high‑voltage withstand test in compliance with EN610950. Widely applied in power utility, telecommunication, rail transit and IDC data centers.

 

Product Parameter (specification)

 

Applicable Battery Voltage

DC88V-275V, compatible with standard 110V & 220V battery packs

Charging Parameters

Charging Voltage DC88V-275V, Charging Current 0~50A

Discharging Parameters

Discharging Voltage DC88V-275V, Discharging Current 0~100A, supports constant current & constant power dual discharge modes

Control & Acquisition Precision

Discharge Current ≤±1%FS; Pack Terminal Voltage ≤±0.5%FS; Single Cell Voltage ≤±0.1%FS

Wireless Single Cell Monitoring

433M RF wireless collection; 25 acquisition modules per main unit, 12 cells per module, max 300 cells monitored; compatible with 1.2V/2V/6V/12V single cells; 100m open-air communication distance, 50m indoor distance; 4 independent frequency bands, up to 4 units working simultaneously without signal interference

Data Storage

Built-in 16G SD card, supports FAT32 U export; stores max 200 full test records; recording interval optional: 1/2/5/10/30/60 mins, max 400 records per single test

Hardware Safety Protection

5-layer protection including overvoltage, undervoltage, overcurrent, reverse polarity, 65℃ overheat shutdown; audio-visual alarm with on-screen text prompt; high-precision flame-retardant power resistor without overheating risk; forced air cooling

Insulation Standard

Input-to-chassis 2200Vdc withstand for 1min, Input-to-output 2200Vdc withstand for 1min, Output-to-chassis 700Vdc withstand for 1min, complies with EN610950

Environmental Adaptability

Operating Temp -5℃~50℃, Storage Temp -40℃~70℃; Relative Humidity 0~90% (non-condensing @40±2℃); Rated Altitude 4000m; Operating Noise <75dB

Power & Communication Interface

Operating Power AC220V (-20%~+30% fluctuation, 45~65Hz); USB, RS485, RF interfaces available; Optional 6-core crystal parallel cable & external current clamp sensor

Operation Display

7-inch 1024*600 resistive touch LCD screen, bilingual Chinese & English menu, built-in electronic help document

 

Product feature

 

All‑in‑one Battery Maintenance: Combine discharging, charging, rejuvenation, online monitoring and quick evaluation. Rejuvenation function relieves sulphation for lead‑acid batteries. Auto switch between float charge and equalizing charge with multiple test stop triggers.

Wireless Cell Acquisition: Reduce heavy field signal wiring. Auto‑rank and highlight high/low‑voltage cells with graphic display. Four independent RF channels allow multiple testers working simultaneously without signal interference.

Multi‑unit Parallel Expansion: Master unit unifies parameter setting, slave units synchronize start‑stop and share load evenly for large‑capacity battery bank tests.

Live‑load Online Test: Match with external current clamp to perform capacity test without disconnecting working load. Original backup power supply keeps working once mains power fails.

RS485 Remote Integration: Open communication protocol for connection with PLC and background monitoring system to realize remote start‑stop and real‑time data reading.

Complete Data Archiving: Auto‑save test records with timestamp and serial number. Export files via USB. Supporting software generates standard reports to meet long‑term archive requirements of power industry.

Multi‑level Hardware Protection: Hardware circuit cut‑off upon fault with audio‑visual reminder. Built‑in operation guidance, Chinese‑English switch for easy operation.

 

Product Working Principle

 

Capacity Test: Adopt constant‑current resistive discharge method. Monitor cell voltage throughout the whole test. Test stops once any cell reaches cut‑off threshold. Actual available capacity is judged by total discharged Ah value.

Closed‑loop Current Regulation: ARM chip samples real‑time signals. PWM‑PID algorithm dynamically adjusts load to maintain stable output against battery voltage variation.

Intelligent Charging: Automatically switch between equalizing charge and float charge according to battery status, balancing charging efficiency and service life.

 

Lead-Acid Battery Cell Voltage Monitor
Product Application

Annual inspection & acceptance for substation DC screen batteries, degraded cell screening; UPS battery maintenance for telecom base stations and data centers; periodic capacity validation for rail transit backup batteries; live‑load UPS test for banks and hospitals; factory capacity calibration for lead‑acid production lines; routine maintenance for backup batteries in factories and industrial parks.

 

 

 

Optional Supporting Accessories

 

  • RF Wireless Single Cell Collector (12 cells per unit, purchasable quantity: 1~25)
  • 6-core Crystal Parallel Communication Cable (2m, dedicated for multi-unit parallel work)
  • External Current Clamp Sensor (mandatory for online compensatory discharge)
  • USB Wireless Receiver (real-time full cell voltage monitoring via PC)
  • Official PC Data Analysis & Management Software (permanent free license, no annual fee)
  • Shockproof Portable Transport Case (on-site construction protection)
  • Complete Consumables: High-current high-temperature test clamps & voltage sampling cables

 

FAQ

 

Q: Are you a manufacturer or a trading company?

A: We are a direct manufacturer specializing in high-voltage testing equipment. We have our own R&D team and production facility, which allows us to offer factory-direct pricing and strict quality control.

Q: What is your warranty and after-sales policy?

A: All units come with a 12-month warranty. After the warranty expires, we provide lifetime technical support and paid maintenance services.

Q: Do you support English language interfaces?

A: Yes, our standard models feature English keyboards, software, and user manuals. If you require other languages, please contact us to check availability for customization.

 

Hot Tags: lead-acid battery cell voltage monitor, China lead-acid battery cell voltage monitor manufacturers, factory, Battery Charge And Discharge Tester, Battery Discharge Tester, Battery Internal Resistance Tester, battery tester, DC Ground Fault Finder

Send Inquiry