Lightning Impulse Voltage Generator

Send Inquiry
Lightning Impulse Voltage Generator
Details
The MOEORW-W3030C impulse voltage tester outputs a standard 1.2/50μs waveform with an adjustable peak voltage of 3kV~30.5kV. It conforms to IEC and multiple national standards and is used for transient overvoltage withstand, clearance, and creepage distance testing of components, low-voltage electrical appliances, and complete sets of equipment. It is easy to operate, has comprehensive safety protection, and is suitable for factory inspection, type testing, and safety certification testing.
Category
Impulse Voltage Generator
Share to
Description

Product Introduction

 

The MOEORW-W3030C impulse voltage tester is ma voltage wave testing device with a waveform of 1.2/50 s. The instrument has a wavefront time of 1.2 ms and a waveback time of 50 ms. It conforms to IEC 60060, GB 7251.1, GB 10963.1, GB 17627.1, GB 14048.1, GB 14048.2, GB 16916.1, and GB 16917.1 standards and is used to test the ability of components to withstand transient overvoltages, as well as the electrical clearances and creepage distances of appliances.

 

Product Parameter (specification)

 

DC high voltage ≥ 40.5 kV
Impulse voltage wave Shock wave pre-wave time: 1.2 µs ± 30%
Post-wave half-time: 50µs ± 20%
Peak voltage 3 kV ~ 30.5 kV ≤ ± 3%
Impact interval time 5 ~ 99 (s)
Note: When the test voltage is >15kV, the charging time should be at least 10 seconds
Number of impacts 1 ~ 9999
Polarity Positive and Negative
Working power supply Rated voltage: ~ 220 V ± 10 % 50Hz
Power consumption: 50 VA
Dimensions and weight External dimensions (width, height, depth): 700 × 1300 × 600 (mm)
Weight: 100 kegs

 

Product Features

 

Standards Compliance

  • Complies with multiple national and international standards such as IEC 60060 and GB 7251.1.
  • The standard 1.2/50μs impulse voltage waveform meets the requirements of electrical safety testing.
     

Performance Indicators

  • Peak voltage 3kV~30.5kV, accuracy ≤±3%
  • DC high voltage ≥40.5kV, polarity adjustable (positive and negative).
  • Impact interval can be set from 5 to 99 seconds, and the number of impacts can be set from 1 to 9999.
     

Easy to operate

  • Touchscreen parameter settings, supports quick access to commonly used voltages
  • One-click configuration of positive/negative polarity cycle process
  • Three-level control for high-voltage start/stop/emergency stop, safe and reliable.
     

Safety Protection

  • High-voltage circuit audible and visual alarm, automatic indication of sample breakdown.
  • The protective door interlocks to cut off high voltage when the door is opened.
  • Reliable grounding protection, residual voltage indication to prevent electric shock
     

Waveform Monitoring

  • Compatible with Tektronix oscilloscope, real-time waveform display
  • Supports waveform storage, fast saving, and comparison with reference waveforms.
  • Voltage divider ratio 1000:1, peak voltage direct reading calculation

 

Product Application

 

Component withstand voltage test

  • Transient overvoltage withstand capability testing of low-voltage electrical appliances and electronic components
  • Verify the device's resistance to lightning strikes and surge impacts.
     

Verification of electrical clearance and creepage distance

  • Compliance assessment of electrical clearances/creep distances for appliances and complete sets of equipment
  • Meets the safety standards for insulation distance testing.
     

Testing of Household Appliances and Low-Voltage Complete Sets of Equipment

  • Impact withstand voltage type test for household appliances and power distribution equipment
  • Factory inspection of switches, circuit breakers, contactors and other products
     

Safety Certification and Laboratory Testing

  • Compliant with IEC/GB standards, used for 3C, CE and other certification testing.
  • High-voltage safety performance testing by quality inspection agencies and enterprise laboratories

 

Company Qualifications

 

 

FAQ

 

Q: Are you a factory or a trading company?

A: We are a professional manufacturer of testing equipment.

Q: How is the after-sales service?

A: The warranty period is 12 months. After the warranty period, we also provide lifetime service paidrepair or service.

Q: What about transportation?

A: It depends on your requirements. We can ship to your airport by air, to your seaport by sea, or to your office by courier.
We also accept cooperation with your shipping agent.

Q: Are your keyboard, interface, software, and manuals in English?

A: Yes, if you are using the English version of the keyboard, interface, software, and manual and require other languages, please contact us for confirmation.

 

Hot Tags: lightning impulse voltage generator, China lightning impulse voltage generator manufacturers, factory, SF6 Leakage Detection Device

Send Inquiry