Impulse Voltage Test Device

Send Inquiry
Impulse Voltage Test Device
Details
The MOEORW-W3100-II impulse voltage generator is a test product designed for electrical engineers, manufacturers, and testing institutions. It features standard impulse waveforms and adjustable output, addressing pain points such as component overvoltage tolerance, insulation compliance, and standard coverage. It is suitable for testing surge protection components, inspecting low-voltage electrical appliances, verifying standard compliance, and conducting R&D quality control sampling.
Category
Impulse Voltage Generator
Share to
Description

Product Introduction

 

The MOEORW-W3100-II impulse voltage generator is a voltage wave testing device with a waveform of 1.2/50 ms. The instrument has a wavefront time of 1.2 ms and a waveback time of 50 ms. The instrument conforms to GB/T7251, GB/T14048, GB/T10963, GB/T16916, GB/T16917, GB/T14711, and IEC255-5 standards, and is used to test the ability of components to withstand transient overvoltages, as well as the electrical clearances and creepage distances of appliances.

 

Product Parameter (specification)

 

DC high voltage ≥20kV
Shock wave pre-wave time 1.2µs±30%
Post-wave half-time 50µs ± 20%
Peak voltage Low: 1.00kV~4.00kV±3%
High: 4.0kV~20.00kV±3%
Impact interval time 5~99 (S)
Number of impacts 1~9999
Polarity Positive and Negative
Instrument internal resistance <500Ω
Power supply Rated voltage: ~220V±10% 50Hz
Power consumption: 50VA
Dimensions and weight External dimensions (width, height, depth): 420×220×480(mm)
Weight: 20kegs

 

Product features

 

Standard waveform output

  • Output 1.2/50μs standard impulse voltage wave
  • Compliant with relevant standards such as GB/T and IEC, used for testing the transient overvoltage withstand capability, electrical clearance, and creepage distance of electronic components.

 

Voltage and polarity

  • High and low peak voltage outputs can meet different test requirements.
  • Positive and negative polarity can be switched

 

Operation control

  • Impact interval time is adjustable
  • The number of impacts can be preset.
  • One-button control for high-voltage start and stop

 

Display and Monitoring

  • Real-time display of charging voltmeter and peak voltage meter
  • The waveform detection port can be connected to an external oscilloscope for easy waveform analysis.
  • The internal voltage division ratio is fixed, facilitating peak calibration.

 

Structural design

  • The front panel integrates operation and output terminals (high voltage output terminals).
  • The rear panel has a power socket, fuse holder, and grounding terminal.
  • The layout is clear and easy to use for wiring and daily operation.

 

Security Protection

  • The power supply must be reliably grounded; otherwise, the test is prohibited.
  • The remaining high voltage can be discharged to zero by continuously pressing the "Stop" button.
  • Before switching polarity, ensure the charging voltage is zero to prevent damage to the instrument.
  • Before maintenance, the high-voltage capacitor must be discharged using a grounding wire.

 

Product Application

 

Transient overvoltage testing of components

Testing the withstand capability of various electrical components (such as varistors, discharge tubes, etc.) to impulse voltage.

 

Low-voltage electrical product testing

Impulse voltage test applicable to low-voltage electrical appliances such as circuit breakers, contactors, relays, and switches.

 

Electrical clearance and creepage distance verification

Used to determine whether the insulation distance between live parts inside a product meets the standard requirements.

 

Lightning protection component evaluation

Test the impulse response characteristics of surge protection components such as varistors and gas discharge tubes.

 

Standard compliance testing

It conforms to standards such as GB/T 7251, GB/T 14048, GB/T 10963, and IEC 255-5, and can be used for type testing or factory inspection.

 

Research and development and quality control

Insulation performance verification during product development phase

Sampling impact testing on the production line

 

Company Qualifications

 

 

FAQ

 

Q: Are you a factory or a trading company?

We are a professional manufacturer of testing equipment.

Q: How is the after-sales service?

A: The warranty period is 12 months. After the warranty period, we also provide lifetime service paidrepair or service.

Q: How is the after-sales service?

A: The warranty period is 12 months. After the warranty period, we also provide lifetime service paidrepair or service.

Q: What about transportation?

A: It depends on your requirements. We can ship to your airport by air, to your seaport by sea, or to your office by courier.
We also accept cooperation with your shipping agent.

Q: Are your keyboard, interface, software, and manuals in English?

A: Yes, if you are using the English version of the keyboard, interface, software, and manual and require other languages, please contact us for confirmation.

 

Hot Tags: impulse voltage test device, China impulse voltage test device manufacturers, factory, SF6 Leakage Detection Device

Send Inquiry