Product Introduction
Full name of the equipment is MOEORW-WER12 Demulsibility Tester, also commonly called demulsification tester or oil-water separation detector in the industry. It is specially designed to quantitatively test the water separation performance of petroleum products and industrial synthetic fluids, serving as standard testing equipment for power plant oil labs, refinery quality inspection centers, third-party CMA testing institutions, chemical factories and university energy research laboratories.
The whole machine is fully developed in accordance with two national standards: GB/T 7305 Standard test method for water separability of petroleum oils and synthetic fluids, GB/T 7605-2008 Test method for demulsibility of in-service turbine oils. All test results are legally valid for laboratory qualification audit, factory oil quality inspection and import & export commodity inspection reports. Applicable oil types are clearly classified: conventional oils with kinematic viscosity 28~90mm²/s at 40℃ are tested under standard constant temperature 54℃±1℃; high-viscosity lubricants and synthetic fluids with viscosity over 90mm²/s support high-temperature testing mode at 82℃±1℃. Equipped with a 5-inch industrial color touch screen and microcomputer automatic program control, the machine completes water bath constant temperature, stirrer lifting, stirring and oil-water separation timing fully automatically without constant manual monitoring. Four independent testing cells double the testing efficiency compared with common 2-cell basic models. It is easy to operate by one person for small independent labs, and greatly reduces equipment investment and labor testing costs for bulk procurement of large petrochemical and power enterprises. We support domestic bulk wholesale and overseas export wholesale, with one-click Chinese & English language switch to meet global customer demands.
Product Parameter (specification)
|
Display System |
5-inch industrial color touch screen, one-click Chinese & English switch |
|
Temperature Control Range |
Ambient temperature ~ 100.0℃; Temperature control accuracy ±0.1℃, temperature resolution 0.01℃ |
|
Temperature Control Algorithm |
Industrial closed-loop PID constant temperature regulation, uniform temperature across the whole water bath |
|
Testing Cells |
4 independent simultaneous test cells, 4 oil samples per single test run |
|
Standard Stirring Speed |
1500±15r/min, built-in closed-loop motor for real-time speed stabilization |
|
Standard Stirring Duration |
Default 5min, adjustable range 0~100min |
|
Sample Standing Time |
Default 10min, adjustable range 0~100min |
|
Separation Timing Range |
00:00 ~ 99:59, auto save timing length once oil-water separation finished |
|
Data Storage |
Circular storage for 256 full test records; earliest records auto overwritten when storage full; support single record deletion & external printer report printing |
|
Rated Power Consumption |
≤1600W |
|
Power Supply |
AC220V±10% 50Hz±10% |
|
Operating Environment |
Ambient temperature 5℃~40℃, relative humidity ≤80%RH (no condensation) |
|
Overall Dimension |
510mm×360mm×580mm (L×W×H) |
|
Net Weight |
23.5kg |
|
Safety Protection |
Dry burning power-off protection (no water in bath), independent fuse overload protection, graduated cylinder locking anti-tilt structure |
Product feature
Compliant with two national standards for legally valid test data: The whole machine is fully designed in accordance with two mandatory industrial standards GB/T7305 and GB/T7605. All test results can be directly adopted for CMA/CNAS laboratory qualification audit, factory oil quality inspection and import & export commodity inspection reports. It meets official audit standards whether for single test in small labs or mass daily testing in large enterprises, eliminating compliance risks of testing equipment.
High-efficiency 4-cell simultaneous testing to fit labs of all scales: Different from mainstream 2-cell basic models on the market, this tester is equipped with 4 independent constant-temperature cells to process 4 oil samples at one time, doubling overall testing efficiency. Small labs cut waiting time for sample batches, while large power plants and petrochemical quality control centers reduce equipment procurement quantity and save lab bench space for mass testing, lowering long-term operation cost. Uniform temperature distribution across the entire water bath ensures highly consistent data of parallel samples and reduces labor waste from repeated re-tests.
Fully automatic closed-loop test program to slash manual labor cost: Integrated microcomputer intelligent control system automates all procedures including constant-temperature standing, stirring start-stop, automatic stirrer lifting and oil-water separation timing without constant operator supervision. New operators can complete full test independently after reading brief manual, and one single staff can finish daily testing work. It remarkably saves labor input for long-hour continuous mass testing, covering all usage scenarios from sporadic sample detection to all-day uninterrupted analysis.
Complete traceable data management system for standardized filing: The machine circularly stores up to 256 full test records including test temperature, separation duration, operation time, temperature calibration logs and equipment operation history. It supports single record deletion and printed report output via external printer. The standardized data archiving fully meets traceability requirements of third-party testing institutes, power plants and chemical factories, and complete test records can be directly submitted for bidding and qualification audits.
Industrial stable hardware structure with ultra-low failure rate for long-term continuous operation: Integrated sheet metal body, thickened heat-resistant glass water bath and anti-offset lifting stirrer bracket are adopted. Every unit passes 8-hour continuous aging inspection before delivery. Closed-loop speed-stabilized stirring motor maintains standard speed 1500±15r/min without drift, and stirrer falling height is standardized to 5~6mm with unified factory calibration. It runs stably with repair rate lower than 0.5% either for intermittent daily lab use or 7×24h non-stop mass testing in factories, greatly cutting after-sales maintenance frequency and cost.
Standard calibration & maintenance system for unified multi-machine management and low operation threshold: Built-in visual temperature correction function matches certified standard thermometer to offset water bath temperature deviation, with independent storage of all calibration records. Spare fuses and complete standard stirrer consumables are standard factory accessories for easy daily replacement for single unit users, while unified calibration benchmarks ensure consistent comparative test data for bulk deployed machines. Standard calibration tutorials help operators master maintenance procedures quickly.
Native dual-language system for global multi-scenario application: One-click switch between Chinese and English without extra customized modification. It can be directly used by domestic industrial factories, university labs and overseas oil testing distributors. Unified model stock preparation avoids separate versions for domestic and overseas orders, supporting all procurement channels including retail, domestic bulk procurement, export wholesale and OEM brand customization.
Multi-layer built-in safety protection for risk-free operation in all scenarios: Three safety mechanisms are equipped: auto power-off protection against dry burning with empty water bath, cylinder anti-tilt lock structure and independent fuse overload protection. It prevents safety hazards such as dry burning, glass breakage and circuit overload either for single-unit operation or simultaneous running of multiple machines, complying with enterprise safety production audit and lab safety specifications.
Standard Full Accessories
- MOEORW-WER12 Demulsibility Tester Main Unit ×1
- National Standard Heat-Resistant Glass Graduated Cylinders ×4
- Stainless Steel Standard Stirrer Blades ×4 sets
- Spare Equipment Fuse (Stored in machine fuse compartment)
- Full Paper Product Operation Manual
- Factory Inspection Qualification Certificate
Optional Value-added Accessories
External Thermal Data Printer, Spare Graduated Cylinder Consumable Kit, Spare Stirrer Blade Kit, Certified Calibration Standard Thermometer
FAQ
Q: Are you a manufacturer or a trading company?
A: We are a direct manufacturer specializing in high-voltage testing equipment. We have our own R&D team and production facility, which allows us to offer factory-direct pricing and strict quality control.
Q: What is your warranty and after-sales policy?
A: All units come with a 12-month warranty. After the warranty expires, we provide lifetime technical support and paid maintenance services.
Q: Do you support English language interfaces?
A: Yes, our standard models feature English keyboards, software, and user manuals. If you require other languages, please contact us to check availability for customization.
Hot Tags: automatic demulsibility tester, China automatic demulsibility tester manufacturers, factory, Closed Flash Point Analyzer, Insulated Gas Chromatographic Analyser, Insulation Oil Gas Chromatograph, Oil Moisture Tester, Oil Resistivity Tester, Petroleum Oil Kinematic Viscometer