Product Introduction
MOEORW-WPS08 8-channel digital partial discharge detector is a high-channel-density test instrument for large-scale and multi-point partial discharge detection. It adopts TCP/IP remote control mode, supports Windows system upper computer operation, and complies with IEC60270 and GB/T7354-2018 standards. With 8 synchronous measuring channels, 80MHz high sampling rate and ultra-high sensitivity, it can realize simultaneous monitoring of multiple parts of large-scale power equipment. It is equipped with powerful remote control softwar
Product Parameter (specification)
| Partial Discharge Measurement System | |
| Measuring Channels | 8 Channels |
| Input Impedance | 50Ω |
| Filter Band | Lower limit 10kHz~80kHz Optional; Upper limit 100kHz~1MHz Optional |
| Sensitivity | <1pC (CA=10nF/CK=1nF), <0.1pC (CA=1nF/CK=1nF) |
| Measuring Range | 0.05pC~10000nC |
| Sampling | 14bit, 80MHz Sampling Rate |
| Gain Adjustment | 60dB/40dB/20dB/0dB/-20dB/-40dB Auto/Manual |
| Test Capacitance Range | 6pF~250μF |
| Linearity Error | <±3% |
| Voltage Measurement System | |
| Input Range | 5~230VAC (RMS) |
| Frequency | 10~450Hz |
| Synchronization Precision | <1° |
| Host & PC Requirements | |
| Power Supply | 176~264VAC, 50/60Hz |
| PC System | Windows 7/10 64-bit |
| Network Port | 10/100/1000Mbps |
| Dimension | 445×355×88mm |
| Weight | 11.7kg |
Product Feature
8-channel high-density test
8 synchronous acquisition channels, suitable for large equipment multi-point monitoring.
80MHz high-speed sampling
Higher sampling rate, capturing micro-second level discharge pulse.
Remote wireless control
Ethernet communication, supporting long-distance PC control and data transmission.
Powerful upper computer software
Supports waveform analysis, FFT spectrum, PRPD/PRPS, snapshot and report generation.
Polarity discrimination anti-interference
Unique polarity discrimination technology, effectively distinguishing interference and discharge.
Multiple calibration modes
Button calibration, manual coefficient and intelligent calibration, easy to operate.
Automatic report output
One-click generation of standard Word test report, improving efficiency.
Standard rack-mounted design
4U height, suitable for standard cabinet installation in laboratory.
Product Application
Company Qualifications
FAQ
Q1: How to connect and control PS08?
A: Connect via Ethernet, configure the same network segment IP, and use supporting software for remote control.
Q2: Can PS08 realize offline data analysis?
A: Yes, the software supports offline mode to load historical data for analysis and report generation.
Q3: What anti-interference functions are unique to PS08?
A: It has polarity discrimination function, which can effectively eliminate co-situation interference.
Q4: Does it support multiple hosts networking for more channels?
A: Yes, multiple hosts can be connected to a PC to expand more channels for synchronous test.
Q5: What is the minimum discharge quantity that can be measured?
A: The minimum measurable can reach 0.1pC under specific capacitance matching conditions.
Hot Tags: 8-channel intelligent partial discharge tester, China 8-channel intelligent partial discharge tester manufacturers, factory
